IndustrialSSR 2500V Insulation Withstand Voltage 200AIndustrialSolidStateRelay

Description

Feature:
1. Stable Current: Excellent power cycle capability and temperature characteristics, stable trigger current, better protection of electrical appliances, and higher isolation voltage.
2. 2500V Insulation Withstand Voltage: Photoelectric isolation between the input and output circuits of the Industrial relay, insulation withstand voltage 2500V, input 4 to 32VDC, output 30 to 450VAC.
3. LED Work Indication: LED work indication, which is convenient for you to observe its status. The interior is filled with epoxy resin, which is shockproof, moistureproof and corrosionproof.
4. Internal Working Method: Industrial SSR adopts internal working method, no internal contact work, no mechanical contact, rejecting spark generation from the source.
5. Aluminum Base Plate: 200A industrial SSR aluminum base plate, good thermal conductivity, faster heat dissipation, service life, more safety and stability.
Specification:
Item Type: 200A Industrial  State Relay
Material: ABS, Aluminum
Model: For H3200ZF
Control Mode: DC Control AC
Work Indication: LED
Ambient Temperature: -20C~75℃
Installation Method: Stud Fixing
Input: 4-32VDC
Output: 30-450VAC
Input Parameters
Control Voltage Range: 3-32VDC
Minimum Control Current: 5mA
Maximum Control Current: 15mA
Make Sure to Turn on the Voltage: 3.5VDC
Ensure Shutdown Voltage: 1.5VDC
Output Parameters
Output Voltage Range: 24-480VAC
Maximum Load Current: 200A
Summit Voltage: 1200VAC
Insulation Resistance: 1000MΩ/500VDC
Leakage Current in OFF State: ≤2mA rms
Saturation Voltage Drop in ON State: ≤1.5V
On Off Response Delay: ≤10ms
General Features:
Insulation Withstand Voltage Between Input and Output: 2500V rms
Insulation Withstand Voltage Between Input and Output and Shell: 4000V rms
Package List:
1 x 200A Industrial  State Relay
Note:
1.When selecting the relay, please pay special attention to the operating current of the load and the ambient temperature, and add sufficient heat sink or take other effective heat dissipation measures when the load is working.
2.The heat generated by the relay needs to be dissipated through the metal base plate of the relay, please pay attention to the installation of the relay and the heat sink with a close fit, the installation should be secure and the joint appearance should be coated with heat conductive silicone grease.
3.When the output terminal is loosely connected to the load line, the heat generated during power on will cause the product to burn. The following is the recommended installation of screws for product wiring: M4 screws with a Torsional moment
of 0137 1.7N m, M8 screws with a Torsional moment
of 1.77 2.17N m. Excessive Torsional moment will damage the relay.
4.50A or more (including 50A) are enhanced state relays.
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3.
T
he duties are buyers' responsibility
.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.
1. Any questions,
pls. contact us via ebay message or email us.
We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "
5
" in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.